Using The Cli To Download A Customized Web Authentication Login Page - Cisco 2100 Series Configuration Manual

Chapter 10 Managing User Accounts
If you are using a TFTP server, enter the amount of time in seconds before the controller times out while
Step 8
attempting to download the *.tar file in the Timeout field.
Range: 1 to 254 seconds
Default: 6 seconds
In the File Path field, enter the path of the .tar file to be downloaded. The default value is "/."
Step 9
In the File Name field, enter the name of the .tar file to be downloaded.
Step 10
If you are using an FTP server, follow these steps:
Step 11
a.
b.
c.
Click Download to download the .tar file to the controller.
Step 12
Click Security > Web Auth > Web Login Page to open the Web Login page.
Step 13
From the Web Authentication Type drop-down box, choose Customized (Downloaded).
Step 14
Click Apply to commit your changes.
Step 15
Click Preview to view your customized web authentication login page.
Step 16
If you are satisfied with the content and appearance of the login page, click Save Configuration to save
Step 17
your changes.

Using the CLI to Download a Customized Web Authentication Login Page

Make sure that you have a TFTP server available for the file download. See the guidelines for setting up
Step 1
a TFTP server in
section on page
Copy the .tar file containing your login page to the default directory on your TFTP server.
Step 2
To specify the download mode, enter transfer download mode tftp.
Step 3
To specify the type of file to be downloaded, enter transfer download datatype webauthbundle.
Step 4
To specify the IP address of the TFTP server, enter transfer download serverip tftp-server-ip-address.
Step 5
Note
To specify the download path, enter transfer download path absolute-tftp-server-path-to-file.
Step 6
To specify the file to be downloaded, enter transfer download filename filename.tar.
Step 7
Enter transfer download start to view your updated settings and answer y to the prompt to confirm the
Step 8
current download settings and start the download.
To specify the web authentication type, enter config custom-web webauth_type customized.
Step 9
OL-17037-01
In the Server Login Username field, enter the username to log into the FTP server.
In the Server Login Password field, enter the password to log into the FTP server.
In the Server Port Number field, enter the port number on the FTP server through which the
download occurs. The default value is 21.
Step 8 of the
10-11.
Some TFTP servers require only a forward slash (/) as the TFTP server IP address, and the TFTP
server automatically determines the path to the correct directory.
"Using the CLI to Choose the Default Web Authentication Login Page"
Cisco Wireless LAN Controller Configuration Guide
Choosing the Web Authentication Login Page
10-19