Configuring Local Network Users - Cisco 2100 Series Configuration Manual

Wireless lan controller

Hide thumbs Also See for 2100 Series:

Table of Contents

Configuring Security Solutions

Configuring Local Network Users

TACACS+ Administration .csv Page on CiscoSecure ACS

You can click Refresh at any time to refresh this page.

Configuring Local Network Users

This section explains how to add local network users to the local user database on the controller. The

local user database stores the credentials (username and password) of all the local network users. These

credentials are then used to authenticate the users. For example, local EAP may use the local user

database as its backend database to retrieve user credentials. Refer to the

"Configuring Local EAP"

section on page 5-38

for more information.

The controller passes client information to the RADIUS authentication server first. If the client

information does not match a RADIUS database entry, the local user database is polled. Clients located

in this database are granted access to network services if the RADIUS authentication fails or does not

You can configure local network users through either the GUI or the CLI.

Cisco Wireless LAN Controller Configuration Guide

Show Quick Links

Table of Contents