Viewing The User Log Counters; Viewing Configuration - Cisco SCE 1000 Quick Start Manual

Viewing the User Log Counters

View the user log for errors that occurred during the installation process.
To display the user log device counters, complete the following steps:
At the SCE 1000# prompt, type
Step 1
Example:
The following example shows the current User-File-Log device counters.
SCE 1000number show logger device user-file-log counters Logger device User-File-Log counters:
Total info messages: 1
Total warning messages: 0
Total error messages: 0
Total fatal messages: 0
If there are "Total error messages" or "Total fatal messages", use the show logger device User-File-Log command to display
details about the errors.

Viewing Configuration

When you enter configuration commands, it immediately effects the SCE platform operation and configuration. This
configuration, referred to as the
platform is up. After reboot, the SCE platform loads the
by the user, into the
running-config
The SCE platform provides commands for:
• Viewing the running configuration
• Viewing the startup configuration
After configuring the SCE platform, you may query for the running configuration using the command show running-config. This
command displays the non-default running configuration. To view all SCE platform running configuration, whether it is the
default or not, you may use the option all-data in the show running-config command.
show logger device User-File-Log counters
, is saved in the SCE platform volatile memory and is effective while the SCE
running-config
startup-config
.
and press Enter.
, which includes the non-default configuration as saved
39