Creating Guest User Accounts As A Lobby Ambassador - Cisco 2100 Series Configuration Manual

Creating Guest User Accounts

Creating Guest User Accounts as a Lobby Ambassador

A lobby ambassador would follow these steps to create guest user accounts.
A lobby ambassador cannot access the controller CLI interface and therefore can create guest user
Note
accounts only from the controller GUI.
Log into the controller as the lobby ambassador, using the username and password specified in the
Step 1
"Creating a Lobby Ambassador Account"
Guest Users List page appears (see
Figure 10-3
Click New to create a guest user account. The Lobby Ambassador Guest Management > Guest Users
Step 2
List > New page appears (see
Figure 10-4
In the User Name field, enter a name for the guest user. You can enter up to 24 characters.
Step 3
Cisco Wireless LAN Controller Configuration Guide
10-4
section above. The Lobby Ambassador Guest Management >
Figure 10-3).
Lobby Ambassador Guest Management > Guest Users List Page
Figure 10-4).
Lobby Ambassador Guest Management > Guest Users List > New Page
Chapter 10 Managing User Accounts
OL-17037-01