Cisco 2100 Series Configuration Manual page 56

Enabling Wireless Connections to the Web-Browser and CLI Interfaces
Use a wireless client to associate to a lightweight access point connected to the controller.
Step 3
On the wireless client, open a Telnet session to the controller, or browse to the controller GUI.
Step 4
To use the controller GUI to enable wireless connections, click Management > Mgmt Via Wireless
Tip
page and check the Enable Controller Management to be accessible from Wireless Clients check
box.
Cisco Wireless LAN Controller Configuration Guide
2-10
Chapter 2 Using the Web-Browser and CLI Interfaces
OL-17037-01