Voice Call Support In A Mesh Network; Using The Cli To View Voice Details For Mesh Networks - Cisco 2100 Series Configuration Manual

Configuring Advanced Features

Voice Call Support in a Mesh Network

Table 8-6
access point role (RAP or MAP) for planning purposes.
Table 8-6
Mesh Access Point Role Radio
RAP
MAP1
MAP2
1. Bandwidth of 855 transmit units (TUs) with 50% of the bandwidth reserved for voice calls.
2. Bandwidth of 1076 TUs with 50% of the bandwidth reserved for voice calls.

Using the CLI to View Voice Details for Mesh Networks

Use the commands in this section to view details on voice calls on the mesh network.
Refer to
Figure 8-17
Cisco Wireless LAN Controller Configuration Guide
8-34
lists a projected minimum and maximum of voice calls supported by radio type and mesh
Projected Voice Call Support on a Mesh Network
802.11a
802.11b/g/n
802.11a
802.11b/g/n
802.11a
802.11b/g/n
Figure 8-17 when using the CLI commands and viewing their output.
Mesh Network Example
RAP 01
MESH
MAP 01
MESH
MAP 02
MESH
MAP 03
MESH
802.11A
802.11B/G
Chapter 8
Minimum Calls Maximum Calls
1
Supported Supported
14 18
14 18
6 9
11 18
4 7
5 9
Controlling Mesh Access Points
2
OL-17037-01