Cisco 2100 Series Configuration Manual page 640

Configuring Auto-Anchor Mobility
Figure 12-14
b. In the Keep Alive Count field, enter the number of times a ping request is sent to an anchor controller
before the anchor is considered to be unreachable. The valid range is 3 to 20, and the default value
is 3.
In the Keep Alive Interval field, enter the amount of time (in seconds) between each ping request
c.
sent to an anchor controller. The valid range is 1 to 30 seconds, and the default value is 10 seconds.
Click Apply to commit your changes.
d.
Click WLANs to open the WLANs page (see
Step 2
Figure 12-15
Step 3 Click the blue drop-down arrow for the desired WLAN or wired guest LAN and choose Mobility
Anchors. The Mobility Anchors page appears (see
Figure 12-16
Cisco Wireless LAN Controller Configuration Guide
12-22
Mobility Anchor Config Page
WLANs Page
Mobility Anchors Page
Chapter 12 Configuring Mobility GroupsWireless Device Access
Figure 12-15).
Figure 12-16).
OL-17037-01