Configuring Hybrid-REAP Groups
Click Apply to commit your changes. The new group appears on the HREAP Groups page.
Step 4
To edit the properties of a group, click the name of the desired group. The HREAP Groups > Edit
Step 5
(General) page appears (see
Figure 13-11
If you want to configure a primary RADIUS server for this group (for example, the access points are
Step 6
using 802.1X authentication), choose the desired server from the Primary RADIUS Server drop-down
list. Otherwise, leave the field set to the default value of None.
If you want to configure a secondary RADIUS server for this group, choose the server from the
Step 7
Secondary RADIUS Server drop-down list. Otherwise, leave the field set to the default value of None.
To add an access point to the group, click Add AP. Additional fields appear on the page under "Add AP"
Step 8
(see
Figure
Figure 13-12
Cisco Wireless LAN Controller Configuration Guide
13-18
Figure
13-11).
HREAP Groups > Edit (General) Page
13-12).
HREAP Groups > Edit (General) Page
Chapter 13
Configuring Hybrid REAPWireless Device Access
OL-17037-01