Catalyst 3750G Integrated Wireless Lan Controller Switch - Cisco 2100 Series Configuration Manual

Catalyst 3750G Integrated Wireless LAN Controller Switch

•
•
Refer to the Cisco Wireless LAN Controller Network Module Feature Guide for more information. You
Note
can find this document at this URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124newft/124limit/124x/124xa2/bo
xernm.htm#wp2033271
Catalyst 3750G Integrated Wireless LAN Controller Switch
Figure E-3
3750G Switch
These commands are used for communication between the Catalyst 3750G switch and the 4402
controller.
Login Command
This command is used to initiate a telnet session from the switch to the controller:
session switch_number processor 1
Cisco Wireless LAN Controller Configuration Guide
E-4
test HW-module integrated-service-engine slot/unit reset {enable | disable}
service-module integrated-service engine slot/port {reload | reset | session [clear] | shutdown |
status}
Logical Connectivity Diagram for the Catalyst 3750G Integrated Wireless LAN
Controller Switch
RS-232 Serial
at 9600 baud
Console
Hidden
G1/0/27 2 SFP Ports
G1/0/28
Hidden
2 SFP Ports
Port 1
Port 2
4402
Controller
Console
RS-232 Serial
at 9600 baud
G1/0/1 through G1/0/24
24 Gig PoE Ports
Switch Motherboard
Memory Boot Flash
Memory Boot Flash
Controller Motherboard
Gig E Service
Ethernet
Appendix E Logical Connectivity Diagrams
G1/0/25
G1/0/26
2 SFP Ports
Flash File System
Flash File System
on CF Card
Do not remove
OL-17037-01