Cisco 2100 Series Configuration Manual page 531

Wireless lan controller
Hide thumbs Also See for 2100 Series:
Table of Contents

Advertisement

Chapter 9
Managing Controller Software and Configurations
Using the CLI to Download Configuration Files
Using the controller CLI, follow these steps to download a configuration file to the controller.
Note
The controller does not support incremental configuration downloads. The configuration file contains all
mandatory CLIs (all interface address CLIs, mgmtuser with read-write permission CLIs, and interface
port or LAG enable or disable CLIs) required to successfully complete the download. For example, if
you download only config time ntp server index server_address as part of the configuration file, the
download fails. Only the CLI commands present in the configuration file are applied to the controller,
and any configuration in the controller prior to the download is removed.
Step 1
To specify the transfer mode used to download the configuration file, enter this command:
transfer download mode {tftp | ftp}
To specify the type of file to be downloaded, enter this command:
Step 2
transfer download datatype config
If the configuration file is encrypted, enter these commands:
Step 3
Note
To specify the IP address of the TFTP or FTP server, enter this command:
Step 4
transfer download serverip server-ip-address
To specify the directory path of the configuration file, enter this command:
Step 5
transfer download path server-path-to-file
Step 6
To specify the name of the configuration file to be downloaded, enter this command:
transfer download filename filename
Step 7
If you are using a TFTP server, enter these commands:
Note
OL-17037-01
transfer encrypt enable
transfer encrypt set-key key, where key is the encryption key used to decrypt the file
The key that you enter here should match the one entered during the upload process.
transfer download tftpMaxRetries retries
transfer download tftpPktTimeout timeout
The default values of 10 retries and a 6-second timeout should work correctly without any
adjustment. However, you can change these values. To do so, enter the maximum number of
times that the TFTP server attempts to download the software for the retries parameter and the
amount of time (in seconds) that the TFTP server attempts to download the software for the
timeout parameter.
Transferring Files to and from a Controller
Cisco Wireless LAN Controller Configuration Guide
9-25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

4400 series

Table of Contents