Cisco 2100 Series Configuration Manual page 631

Chapter 12 Configuring Mobility GroupsWireless Device Access
Figure 12-10
Follow these steps to add more controllers to the mobility group:
Click inside the edit box to start a new line.
a.
Enter the MAC address, the management interface IP address, and the name of the mobility group
b.
for the controller to be added.
Note
Note
Repeat
c.
Highlight and copy the complete list of entries in the edit box.
d.
Click Apply to commit your changes. The new controllers are added to the list of mobility group
e.
members on the Static Mobility Group Members page.
Click Save Configuration to save your changes.
f.
Paste the list into the edit box on the Mobility Group Members > Edit All page of all the other
g.
controllers in the mobility group and click Apply and Save Configuration.
Click Multicast Messaging to open the Mobility Multicast Messaging page (see
Step 5
Figure 12-11
The names of all the currently configured mobility groups appear in the middle of the page.
OL-17037-01
Mobility Group Members > Edit All Page
These values should be entered on one line and separated by one or two spaces.
The mobility group name is case sensitive.
Step a and Step b for each additional controller that you want to add to the mobility group.
Mobility Multicast Messaging Page
Cisco Wireless LAN Controller Configuration Guide
Configuring Mobility Groups
Figure 12-11).
12-13