Cisco 2100 Series Configuration Manual page 322

Configuring WLANs
Figure 6-6
In the Pool Start Address field, enter the starting IP address in the range assigned to the clients.
Step 5
Note
In the Pool End Address field, enter the ending IP address in the range assigned to the clients.
Step 6
Note
In the Network field, enter the network served by this DHCP scope. This is the IP address used by the
Step 7
management interface with Netmask applied, as configured on the Interfaces page.
In the Netmask field, enter the subnet mask assigned to all wireless clients.
Step 8
In the Lease Time field, enter the amount of time (from 0 to 65536 seconds) that an IP address is granted
Step 9
to a client.
In the Default Routers field, enter the IP address of the optional router(s) connecting the controllers.
Step 10
Each router must include a DHCP forwarding agent, which allows a single controller to serve the clients
of multiple controllers.
In the DNS Domain Name field, enter the optional domain name system (DNS) domain name of this
Step 11
DHCP scope for use with one or more DNS servers.
Step 12 In the DNS Servers field, enter the IP address of the optional DNS server(s). Each DNS server must be
able to update a client's DNS entry to match the IP address assigned by this DHCP scope.
Step 13 In the Netbios Name Servers field, enter the IP address of the optional Microsoft Network Basic Input
Output System (NetBIOS) name server(s), such as a s Internet Naming Service (WINS) server.
From the Status drop-down box, choose Enabled to enable this DHCP scope or Disabled to disable it.
Step 14
Click Apply to commit your changes.
Step 15
Step 16 Click Save Configuration to save your changes.
Cisco Wireless LAN Controller Configuration Guide
6-12
DHCP Scope > Edit Page
This pool must be unique for each DHCP scope and must not include the static IP addresses of
routers or other servers.
This pool must be unique for each DHCP scope and must not include the static IP addresses of
routers or other servers.
Chapter 6 Configuring WLANsWireless Device Access
OL-17037-01