Choosing The Web Authentication Login Page - Cisco 2100 Series Configuration Manual

Chapter 10 Managing User Accounts
Figure 10-9
The default successful login page contains a pointer to a virtual gateway address URL:
https://1.1.1.1/logout.html. The IP address that you set for the controller virtual interface serves as the
redirect address for the login page (see

Choosing the Web Authentication Login Page

This section provides instructions for specifying the content and appearance of the web authentication
login page. Follow the instructions in one of these sections to choose the web authentication login page
using the controller GUI or CLI:
•
•
•
•
•
Note If you do not want users to connect to a web page using a browser that is configured with SSLv2 only,
you can disable SSLv2 for web authentication by entering this command: config network secureweb
cipher-option sslv2 disable. If you enter this command, users must use a browser that is configured to
use a more secure protocol such as SSLv3 or later. The default value is enabled.
OL-17037-01
Successful Login Page
Choosing the Default Web Authentication Login Page, page 10-10
Creating a Customized Web Authentication Login Page, page 10-14
Using a Customized Web Authentication Login Page from an External Web Server, page 10-16
Downloading a Customized Web Authentication Login Page, page 10-17
Assigning Login, Login Failure, and Logout Pages per WLAN, page 10-21
Choosing the Web Authentication Login Page
Chapter 3 for more information on the virtual interface).
Cisco Wireless LAN Controller Configuration Guide
10-9