Using The Gui To Configure Aaa Override - Cisco 2100 Series Configuration Manual

Chapter 5 Configuring Security Solutions
VALUE Aire-QoS-Level Gold
VALUE Aire-QoS-Level Platinum 2
ATTRIBUTE
ATTRIBUTE
ATTRIBUTE
ATTRIBUTE
# This should be last.
################################################################################
# CiscoWLAN.dct - Cisco WLC dictionary
##############################################################################
Open the dictiona.dcm file (in the same directory) and add the line "@ciscowlan.dct."
Step 3
Save and close the dictiona.dcm file.
Step 4
Open the vendor.ini file (in the same directory) and add the following text:
Step 5
vendor-product
dictionary
ignore-ports
port-number-usage
help-id
Save and close the vendor.ini file.
Step 6
Start the SBR service (or other RADIUS service).
Step 7
Launch the SBR Administrator (or other RADIUS Administrator).
Step 8
Add a RADIUS client (if not already added). Choose Cisco WLAN Controller from the Make/Model
Step 9
drop-down box.

Using the GUI to Configure AAA Override

Follow these steps to configure AAA override using the controller GUI.
Click WLANs to open the WLANs page.
Step 1
Click the ID number of the WLAN that you want to configure. The WLANs > Edit page appears.
Step 2
Click the Advanced tab to open the WLANs > Edit (Advanced) page (see
Step 3
OL-17037-01
1
DSCP
802.1P-Tag
Interface-Name
ACL-Name
= Cisco WLAN Controller
= ciscowlan
= no
= per-port-type
=
Airespace-VSA(3, integer)
Airespace-VSA(4, integer)
Airespace-VSA(5, string)
Airespace-VSA(6, string)
Cisco Wireless LAN Controller Configuration Guide
Configuring Identity Networking
r
r
r
r
Figure 5-40).
5-79