Cisco 4400 Series Wireless Lan Controllers - Cisco 2100 Series Configuration Manual

Network Connections to Cisco Wireless LAN Controllers

Cisco 4400 Series Wireless LAN Controllers

Cisco 4400 series controllers can communicate with the network through one or two pairs of physical
data ports, and the logical management interface can be assigned to the ports. The physical port
descriptions follows:
•
•
Figure 1-5
Figure 1-5
Cisco Wireless LAN Controller Configuration Guide
1-18
For the 4402 controller, up to two of the following connections are supported in any combination:
1000BASE-T (Gigabit Ethernet, front panel, RJ-45 physical port, UTP cable).
–
1000BASE-SX (Gigabit Ethernet, front panel, LC physical port, multi-mode 850nM (SX)
–
fiber-optic links using LC physical connectors).
1000BASE-LX (Gigabit Ethernet, front panel, LC physical port, multi-mode 1300nM (LX/LH)
–
fiber-optic links using LC physical connectors).
For the 4404 controller, up to four of the following connections are supported in any combination:
1000BASE-T (Gigabit Ethernet, front panel, RJ-45 physical port, UTP cable).
–
1000BASE-SX (Gigabit Ethernet, front panel, LC physical port, multi-mode 850nM (SX)
–
fiber-optic links using LC physical connectors).
1000BASE-LX (Gigabit Ethernet, front panel, LX physical port, multi-mode 1300nM (LX/LH)
–
fiber-optic links using LC physical connectors).
shows connections to the 4400 series controller.
Physical Network Connections to 4402 and 4404 Series Controllers
Chapter 1 Overview
OL-17037-01