Cisco 2100 Series Configuration Manual page 756

Configuring Wireless Sniffing
Figure D-10
From the AP Mode drop-down box, choose Sniffer.
Step 3
Click Apply to commit your changes.
Step 4
Step 5 Click OK when warned that the access point will be rebooted.
Step 6 Click Wireless > Access Points > Radios > 802.11a/n (or 802.11b/g/n) to open the 802.11a/n (or
802.11b/g/n) Radios page.
Step 7 Hover your cursor over the blue drop-down arrow for the desired access point and choose Configure.
The 802.11a/n (or 802.11b/g/n) Cisco APs > Configure page appears (see
Figure D-11
Cisco Wireless LAN Controller Configuration Guide
D-40
All APs > Details for Page
802.11b/g/n Cisco APs > Configure Page
Appendix D Troubleshooting
Figure D-11).
OL-17037-01