Chapter 4
Configuring Controller SettingsWireless Device Access
Click Save Configuration to save your changes.
Step 11
Repeat this procedure if you want to configure video parameters for another radio band (802.11a or
Step 12
802.11b/g).
Using the GUI to View Voice and Video Settings
Follow these steps to view voice and video settings using the GUI.
Click Monitor > Clients to open the Clients page (see
Step 1
Figure 4-19
Click the MAC address of the desired client to open the Clients > Detail page (see
Step 2
OL-17037-01
Clients Page
Configuring Voice and Video Parameters
Figure
4-19).
Cisco Wireless LAN Controller Configuration Guide
Figure
4-20).
4-57