Cisco Ons 15454 Views; Cerent Alarm Table View - Cisco ONS 15454 User Manual

Cisco ONS 15454 Views

This section describes device-specific MIB views for the
Cisco ONS 15454 that are accessible from the Icon
Subviews menu of the Device icon.
In This Section
Cerent Alarm Table View [page 33]

Cerent Alarm Table View

Note: From the Icon Subviews menu for the Device icon,
This table (Figure
Only notifications whose severity is minor, major, or critical will have
entries in this table. When an alarm clears, its entry will be removed from
the table. Double-clicking an entry in this table opens an Alarm Table Entry
view (Figure 3) for that entry. These views contain the following
information.
Alarm Count
Total number of active alarms in Cisco ONS 15454. This equals the total
number of rows in the Alarm Table at any one time.
Node Time
Indicates current local time as reflected by the Cisco OTBU equipment. The
format for this scalar is YYYYMMDDhhmmss{S/D}. E.g.,
20011103133453D means 1:34:53 PM PDT on 03/Nov/2001
19990614095436S means 9:54:36 AM PST on 14/Jun/1999. If the last
octet is S, then the time is standard time. Otherwise it is D to indicate it is
daylight savings time, if applicable.
Notifications Sent
A count of v1+v2 notifications sent out by the agent. Resets to zero after
cold/warm start.
Enable Notifications
This button controls whether or not the device will send notifications. Set
this button to FALSE to prevent notifications from being sent.
select Alarm Information.
2) contains information about an alarming notifications.
Cisco ONS 15454
Management Module Guide
Page 33
Document 5139