Displaying The Life Management Data (L System: Tool Life Management I) - Mitsubishi Electric 700 Series Training Manual

3. Setup Screen

3.5.3 Displaying the Life Management Data (L system: Tool life management I)

The tool life management data can be set and displayed. Use the
if all of the registered tools cannot be displayed on one screen.
Display items (L system)
Display item
(1) #
(2) Time Used
Life
(3) Count Used
Life
(4) Status A
(left side)
B
(right side)
Details
Tool No.
The # No. is highlighted if the usage time reaches the
life time or if the usage count exceeds the life count.
The integrated time the tool is used.
This timer value is incremented during cutting.
Tool life time
Set the service lifetime.
The integrated count the tool is used.
The count goes up when a tool is selected.
Tool life count
Set the service life count.
The tool life management status is indicated.
0: Not used
1: Current tool (tool being used)
2: Service lifetime (service life count) is exceeded.
(Used by machine tool builder)
116
3.5 Tool Life Management
/ keys to scroll between screens
0:0:0 to 99:59:59 (h:min:s)
0:0 to 99:59(h:min)
(0:0 = no warning given)
0 to 9999 (times)
times
0 to 9999 (
(0:0 = no warning given)
0 to 2
0 to 99
)