Appendices; Appendix 1 Comparison, Differences And Compatibility Between New And Conventional Models - Mitsubishi Electric AJ65VBTCU-68DAVN User Manual

APPENDICES

APPENDICES
Appendix 1 Comparison, Differences and Compatibility between New and Conventional
Models
(1) Comparison between AJ65VBTCU-68DAV and AJ65VBTCU-
Comparison between AJ65VBTCU-68DAV and AJ65VBTCU-68DAVN
Item AJ65VBTCU-68DAV
Ver. 1 remote device station (ver. 1 compatible
System
slave station) or remote device station
compatibility
(Station
Remote net ver. 1 mode or remote net mode
type, mode)
Number of
3 stations (RX/RY 32 points each, RWr/RWw 12
occupied
points each)
stations
On
Flicker : 0.1s intervals Input range
Operation
status
Normal
indicator
mode
LED/RUN
LED
Off
AJ65VBTCU-68DAV
Mode select
0: Normal mode
switch
1: Test mode (user range setting 1)
(factory
2: Test mode (user range setting 2)
setting "0")
3 to 7: Reserved
APPX - 1
68DAVN
The following table indicates the comparison between the AJ65VBTCU-68DAV
and AJ65VBTCU-68DAVN.
: During normal operation
setting error,
mode select
switch setting
error
0.5s intervals Digital value
setting error
: 24VDC power off or watchdog
timer error
AJ65VBTCU-68DAVN
• Ver. 1 remote device station (ver. 1 compatible slave station) or
remote device station
• Ver. 2 remote device station (ver. 2 compatible slave station)
• Remote net ver. 1 mode or remote net mode
• Remote net ver. 2 mode
• Remote net additional mode
Ver. 1 remote device station (ver. 1 compatible slave station) setting:
3 stations (RX/RY 32 points each, RWr/RWw 12 points each)
Ver. 2 remote device station (ver. 2 compatible slave station) setting:
1 station (RX/RY 32 points each, RWr/RWw 16 points each)
On : During normal operation
Flicker : 0.1s intervals Input range setting error, mode
Normal
mode
0.5s intervals Digital value setting error, or
Off : 24VDC power off or watchdog timer error
AJ65VBTCU-68DAVN
Ver. 1 remote device station 0: Normal mode
1: Test mode (user range setting 1)
(Ver. 1 compatible slave
station) 2: Test mode (user range setting 2)
Ver. 2 remote device station 3: Normal mode
(Ver. 2 compatible slave 4: Test mode (user range setting 1)
station) 5: Test mode (user range setting 2)
– 6 to 7: Reserved
MELSEC-A
select switch setting error, or
when this module is set as the
ver. 2 remote device station (ver.
2 compatible slave station) and
used with the remote net ver. 1
mode selected in the mode
setting of the network parameter.
when the mode select switch
setting is changed after power-
on.
APPX - 1
A