Mark - Honda Civic Service Manual

Engine RemovaUlnstallation
Removal
@@
1 .
. Make sure iacks and salety stands are placed ploperly
and hoist brackets are attached to the correct posi-
tions on the engine.
. Make sure the vehicle will not roll off stands and fall
while you are working under it.
CAUTION:
. Use fender covers to avoid damaging painted sur-
face.
. Unplug the wilin9 connectors caretully while holding
the conngstor portion to avoid damage,
. Mark all wiring and hosos to avoid misconnoction.
Also, be sure that they do not contact other wiring or
hoses or interfere with other parts,
Secure the hood as open as possible.
Disconnect the battery negative terminal first. then
the positive terminal. Remove the battery.
Remove the strut brace (B'16A2 engine).
8 x 1 .25 mm
24 N.m {2.4 kgl.m, 17 lbf.ft}
Disconnect the battery cables from the under-hood
fuse/relay box and battery positive terminal.
STRUT BRACE
UNDER.HOOD
FUSE/RELAY
BOX
BATTERY CABLES
5-2
ECM/PCM
(
5. Remove the battery and battery base.
8 x 1 . 2 5 m m
24 N.m (2.4 kgf.m, 17 lbf ftl
7 .
Disconnect the connectors from the ECM/pCM.
Disconnect the main wire harness connector.
M A I N W I R E H A R N E S S
CONNECTOR