Honda Civic Service Manual page 651

Mainshaft Assembly
Clearance Inspection (cont'dl
6.
Measure the clearance between sth gear and
spacer collar.
Standard:
0.05 - 0.21 mm (0.002 - 0.008 inl
Service limit: 0.3 mm 10.012 inl
lf the clearance is more than the service limit, mea-
sure distance €) on the spacer collar.
Standard: 26.03 - 26.08 mm {1.025 - 1.027 inl
t h e
1 .
5TH GEAB
\
8.
lf distance (E is not within the standard, replace the
spacer collar with a new one.
lf distance @ is within the standard, measure the
thickness of 5th gear.
Standard:
31.12-31.47 mm {1.237 - 1.239 in}
Service Limit:31.3 mm {1.232 in)
lf the thickness of 5th gear is less than the ser-
vice limit, replace sth gear with a new one.
lf the thickness of 5th gear is within the servace
l i m i t , r e p l a c e t h e 5 t h s y n c h r o h u b w i t h a n e w
one.
u , a
5TH GEAR
3-70
SPACER COLLAB