Honda Civic Service Manual page 801

Transmission
Removal
@
Maks sure lifts, iacks and safety stands are placed
properly, and hoist bracket ate aftached to the cor_
rec{ position on the engine lsee section 1).
Apply parking brake and block rear whoels so vehicle
will not roll off stands and fall on you while working
under it.
CAUTION: Use tender covers to avoid damaging paint-
ed surfaces.
1, Disconnect the battery negative (_) terminal from
the battery, then remove the positive (+) terminal.
2. Remove the intake air duct.
D16Y7 engins:
Remove the intake air duct and resonator.
D16Y8 engine:
Remove the intake air duct and the air cleaner hous-
ing assembly,
3. Remove the starter cables and cable holder from
the starter motor.
MOTOR CABLE
MOTOR CABLE
14-122
4.
Remove the transmission ground cable, and discon_
nect the lock-up control solenoid connector.
LOCK.UP CONTROL
SOLENOID CONNECTOR
5, Disconnect the vehicle speed sensor (VSS) connec_
tor and the countershaft speed sensor connector.
VEHICLE SPEED