Honda Civic Service Manual page 142

Cylinder Head
Rocker Arms
1 8 .
1 9 .
2 1 .
22.
Removal (cont'd)
Remove the timing belt {see page 6-19).
Remove the camshaft pulley and back cover,
CAMSHAFT
PULLEY
Clean when installing.
6 x 1 . 0 m m
8 x 1.25 mm
37 N.m (3.8 kgf.m,
21 tbtlrl
Apply engine oilto the
bolt threads.
Remove the exhaust manifold {see pages 9-6 and 9_7).
Remove the intake manifold (see pages 9-2 thru 4).
Remove the cylinder head bolts, then remove the
cylinder head.
CAUTION: To pr€vent warpage, unsclew lhe bohs
in sequonce 1/3 turn at a time; rgpeat tho sequence
until all bolts are loosened.
CYLINDER HEAD BOLTS LOOSENING SEOUENGE:
6 - 3 0
Removal
1. Loosen the adjusting screws.
2. Unscrew the camshaft holder bolts, then,remove
the rocker arm assembly.
NOTE:
a Unscrew the camshaft holder bolts two turns at a
t,me, in a crisscross pattern, to prevent damao_
ing the valves or rocker arm assembly.
. When removing the rocker arm assembly, do not
remove the camshaft holder bolts. The bolts will
keep the camshaft holders, the springs and the
rocker arms on the shaft.
CAMSHAFT HOLDER BOLTS LOOSENING
SEOUENCE:
\
(
ADJUSTING SCREWS