Honda Civic Service Manual page 187

Gamshafts
Inspection (cont'dl
7. lf the camshaft-to-holder oil clearance is out of tol-
erance:
- And the camshaft has already been replaced, you
must replace the cylinder head.
-
lf the camshaft has not been replaced, first check
the total runout with the camshaft supported on
V-blocks.
Camshaft Total Runout:
Standard (New): 0.03 mm {0.001 in} max.
Service Limit:
0.04 mm (0.002 inl
-
lf the total runout of the camshaft is within toler,
ance, replace the cylinder head.
-
lf the total runout is out of tolerance. replace the
camshaft and recheck the camshaft to,holder oil
clearance. lf the oil clearance is still out of toler-
ance, replace the cylinder head.
INTAKE
EXHAUST
PRIMARY
33.088 mm
{1.3027 in)
32.785 mm
(1.2907 inl
M I D
36.267 mm
(1.4278 in)
35.720 mm
{1.4063 in)
SECONDARY
34.978 mm
( 1 . 3 7 7 1 i n l
3i1.691 mm
(1.3658 in)
8.
Check the cam lobe height.
Cam lobe height standard (New):
Cam Position
I
INTAKE
MID
EXHAUST
SEC MID PRI
T I B
T/B: TIMING BELT
PRI: PRIMARY
MID: MID
Check thrs area lor wear.