Honda Civic Service Manual page 893

Description
Hydraulic Flow (cont'dl
lll position, at low spo€d range
The flow of fluid up to the drive pulley, the driven pulley, and the
clutch reducing valve is the same as in El position. The
pulley ratio is low because the driven pulley receives high pressure (PH),
and the drive pulley receives low pressure (pL),
The clutch reducing pressure {cR) flows through the manual valve
to the forwaro clutch, ttren forward ciulcn is engaged.
The forward clutch then drives the drive pulley shaft, which drives
the d(ven pu ey shaft.
Also' clutch reducing pressure {cR) flows to the start clutch
control valve, and becomes clutch control pressure
{cc).
clutch control pressure (cc) becomes start clutch pressure (sc) at
the shift inhibitor valve. stan clutch pressure {sc) is
applied to the start clutch to engage the start clutch.
14-214