Honda Civic Service Manual page 123

4.
Loosen the regulator valve on the valve inspection
tool and apply the specified air pressure.
Specified Air Pressure:
250 kPa {2.5 kgf/cm', 36 psil
PRIMARY ROCKER
ARM
SYNCHRONIZING SYNCHRONIZING
PISTON A
PISTON B
Make sure that the intake primary and secondary
rocker arms are mechanically connected by the piston
and that the mid rocker arm does not move when
oushed manuallY.
5.
MID ROCKER
SECONDARY
ARM
ROCKER ARM
SECONDARY
ROCKER ARM
lf any intake mid rocker arm moves independently of
the primary and secondary rocker arms, replace the
rocker arms as a set.
t
1 .
8 .
9 .
Remove the special tools.
U s e a 1 0 m m d i a m e t e r r o d t o d e p r e s s e a c h l o s t
motion assembly through its full movement.
Replace any lost motion assembly that does move
smoothly.
After inspection, check that the MIL does not come
o n .
ASSEMBLY
6 - 1 1