Honda Civic Service Manual page 622

17. Instali the oil gutter Plate.
I n s t a l l t h e o i l g u i d e p l a t e a n d t h r u s t s h i m o n t h e
transmission housing.
Apply Iiquid gasket to the surface of the transmis-
s i o n h o u s i n g m a t i n g w i t h t h e c l u t c h h o u s i n g a s
shown.
NOTE:
.
U s e l i q u i d g a s k e t { P / N 0 8 7 1 8 - 0 0 0 1 o r
08718 - 0003).
. Remove the dirty oil fromthesealing surface.
. lf 5 minutes have passed after applying liquid
gasket, reapply it and assemble the housings.
. Allow it to cure at least 20 minutes after assem-
bly before filling the transmission with oil.
1 8 .
1 9 .
\
OIL GUTTER PTATE
TRANSMISSION HOUSING
Liquid gasket
20.
lnstall the dowel pins and the transmission housing.
Lower the transmission housing with the snap ring
pliers, and set the snap ring into the groove of the
countershaft bearing.
NOTE: Check that the snap ring is securely seated
in the groove of the countershaft bearing
32 mm SEALING EOLT
25 N.m (2.5 kgf.m, 18lbf.ftl
4 . 6 - 8 . 3 m m
1 0 . 1 4 - 0 . 3 3 i n l
Install the 32 mm sealing bolt.
N O T E : A p p l y l i q u i d g a s k e t ( P / N 0 8 7 1 8 - 0 0 0 1
08718 - 0003) to the threads.
(cont'd)
22.
13-41