Honda Civic Service Manual page 841

Clutch
Reassembly
NOTE:
. C l e a n a l l p a r t s t h o r o u g h l y i n s o l v e n t o r c a r b u r e t o r
a
cleaner, and dry them with compressed air.
Blow out all passages.
Lubricate all parts with ATF before reassembly.
Inspect the check valve; if it's loose, replace the pis-
to n.
1 .
CHECK VALVE
2. Install new O-rings on the clutch piston.
O RINGS
PISTON
14-162
3.
Install the piston in the clutch drum, Apply pressure
and rotate to ensure proper seating,
NOTE: Lubricate the piston O-ring with ATF before
installing.
CAUTION: Do not pinch the O-ring by insta ing the
piston with too much force.
CLUTCII DRUM
I n s t a l l t h e r e t u r n s p r i n g a n d s p r i n g r e t a i n e r , a n d
position the snap ring on the retainer.
CLUTCI{ DRUM