Shift Indicator Panel
ATF Cooler Hoses
Adiustment
'1.
Check that the index mark on the indicator alions
with the N mark on the shift indicator panel when
the transmission is in NEUTRAL.
3 N.m {0.3 kgf.m, 2lbt.ftl
lf not aligned. remove the front console {see section
20t.
Remove the shift indicator panel mounting screws
and adjust by moving the panel,
NOTE: Whenever the shift indicator panel is removed,
reinstallthe panel as described above,
INDEX MARK
14-192
Connection
1. Connect the ATF cooler hoses to the ATF cooler lines
and ATF cooler, and secure them with the clips as
shown.
TRANSMISSION
CLIP