Honda Civic Service Manual page 656

I
I
I
, '
I
Clearance Inspection
1 . M e a s u r e t h e c l e a r a n c e b e t w e e n t h e 1 s t g e a r a n d
distance collar.
Standard:
0,045 - 0.205 mm
10.002 - 0.008 in)
Service Limit: 0.25 mm (0.01 inl
2.
lf the clearance exceeds the service limit. measure
the thicknesses of 1st gear.
lST GEAR
Standard: 29.45 - 29.50 mm {1.159 - 1.161 in}
DISTANCE COLLAR
Standard:@ 36.5 mm (1.4i1in)
@ ,12.0 mm (1.65 in)
@ 3 0 . 0 m m ( 1 . 1 8 i n )
lf the thicknesses of 1st gear and distance collar
are less than the standard, replace with a new
o n e .
lf the thicknesses of 1st gear and distance collar
are within the standard, replace the lsv2nd syn-
chro hub with a new one.
3 .
M e a s u r e t h e c l e a r a n c e b e t w e e n
gears.
Standard:
0.07 - 0.14 mm
(0.003 - 0.006 inl
Servico Limii: 0.24 mm (0.009 in)
t h e 2 n d a n d 3 r d
3RD GEAR
2 N D G E A R
4.
lf the clearance exceeds the service limit, measure
the thicknesses of znd gear and spacer.
2ND GEAR
Standard: 28.92 - 28.97 mm (1.139 - 1.1't1 inl
'-.
ll
-=Jl
71 il
SPACER COLLAR
Standard: 29.07 - 29.09 mm {1.1it4 - 1.1,15 inl
lf the thicknesses of 2nd gear and spacer are less
than the standard, replace with a new one.
l f t h e t h i c k n e s s e s o f 2 n d g e a r a n d s p a c e r a r e
within the standard, replace the lsv2nd synchro
hub with a new one.
13-75