Honda Civic Service Manual page 127

10. Using a downward motion on the lever arm, com-
.press the valve spring and remove the keepers from
t h e v a l v e s t e m . S l o w l y r e l e a s e p r e s s u r e o n t h e
spring.
11. Remove the valve seals (see page 6-38).
12. Install the valve seals {see page 6-43).
13. Install the springs, the retainers and the keepers in
reverse order of removal.
Exhaust Valvs Sesls:
Select the 7/8 in. diameter short compressor attach-
ment, and fasten the attachment to the No. 2 hole of
the lever arm with the speed pin supplied.
Position the lever arm under the cross shaft so the
lever is perpendicular to the shaft and the compres-
sor attachment rests on top of the retainer for the
s p r i n g b e i n g c o m p r e s s e d . U s e t h e f r o n t p o s i t i o n
slot on the lever as shown.
'14.
IN-CAR SPRING COMPRESSOR
7/8 in SHORT ATTACHMENT
L
1 6 . Using a downward motion on the lever arm, com-
press the valve spring and remove the keepers from
t h e v a l v e s t e m . S l o w l y r e l e a s e p r e s s u r e o n t h e
spnng.
Remove the valve seals {see page 6-38),
Install the valve seals (see page 6-43).
Install the springs, the retainers and the keepers in
reverse order of removal.
Repeat steps 6 to 19 on the other cylinders.
't7.
'18.
1 9 .
20.
6 - 1 5