Honda Civic Service Manual page 729

Troubleshooting Procedures
1 .
2 .
(cont'dl
Remove the kick panel on the passenger's side {see section 20}.
Remove the PCM. and turn the PCM over.
Inspect the circuit on the PCM according to the troubleshooting flowchart with the spocial tools and a digital multime-
ter as shown.
How lo Use tha Backprobe Set
Connect the backprobe adapters to the stacking patch cords, and connect the cords to a multimeter. Using the wire
insulation as a guide for the contoured tip of the backprobe adapter, gently slide the tip into the connector from the
wire side until it comes in contact with the terminal end ofthe wire.
BACKPROSE
BACKPROBE SET
07saz - (xtl(xtoA
{two required)
DIGITAL MULNMEIER
(Comm€rcially 6vailabl€l
- a H M - 3 2 - 0 0 3
1 4- 5 0
or equival€nt