Honda Civic Service Manual page 803

Transmission
Removal(cont'd)
'10. Remove
the cotter pins and castle nuts, th€n separate
the balljoints from the lower arms (see section 1gl.
DAMPER PINCH BOLT
NUT
FORI(
FORK BOLT
11. Remove the right damper fork bolt. th€n
right damper fork and dampor.
COTTER PIN
Replace.
separate
1 2 .
1 a
1 4 .
Pry the right and left driveshafts out ofthe differential.
Pull on the inboard joint to remove the right and left
drivsshafts (see section 16).
Tie plastic bags over the driveshaft onds.
NOTE: Coat all precision finished surfaces with clean
engine oil.
Remove the exhaust pipe A,
NOTE: Dl6YB engine is shown; D16y7 engine is
similar.
t 9 .
SELF-LOCKING NUT
Replace.
14-124
EXHAUST PIPE A
MOUNT/BRACKET
1 7 .
1 8 .
16. Remove the shift cable cover. then remove the shift
cable by removing the control lever,
CAUTION: Take car6 not to bond the shift cable.
Remove the right front mounvbracket.
Remove the ATF cooler hoses at the ATF cooler
lines. Tufn the ends of the ATF cooler hoses uo to
prevent ATF from flowing out, then plug the ATF
cooler hosgs and lines.
NOTE: Check for any sign of leakage at the hose
ioints.
WASHER