Mitsubishi Electric GT1685 Connection Manual page 277

(3) AJ71C24/UC24
Item Description
Set this item when change the
Transmission transmission speed used for
Speed communication with the connected
equipment. (Default: 19200bps)
Set this item when change the data
length used for communication with the
Data Bit
connected equipment.
(Default: 8bit)
Specify the stop bit length for
Stop Bit communications.
(Default: 1bit)
Specify whether or not to perform a
parity check, and how it is performed
Parity
during communication.
(Default: Odd)
Set the number of retries to be
performed when a communication
timeout occurs. When receiving no
Retry
response after retries, the
communication times out.
(Default: 0time)
Set the time period for a communication
Timeout Time
to time out. (Default: 3sec)
Set this item to adjust the transmission
Delay Time timing of the communication request
from the GOT. (Default: 0ms)
(4) QnA/L/Q CPU (GT10)
Item
Range
4800bps,
9600bps,
19200bps
Transmission
Speed
8bit (fixed)
1bit (fixed)
POINT POINT POINT
Odd (fixed)
(1) Communication interface setting by the Utility
The communication interface setting can be
changed on the Utility's [Communication Settings]
after writing [Communication Settings] of project
data.
0 to 5times
For details on the Utility, refer to the following
manual.
(2) Precedence in communication settings
3 to 30sec
When settings are made by GT Designer3 or the
Utility, the latest setting is effective.
0 to 300 (ms)
HINT HINT HINT
Cutting the portion of multiple connection of the
controller
By setting GOT internal device, GOT can cut the
portion of multiple connection of the controller. For
example, faulty station that has communication
timeout can be cut from the system.
For details of the setting contents of GOT internal
device, refer to the following manual.
7. COMPUTER LINK CONNECTION
Description
Set this item when change the
transmission speed used for
communication with the connected
equipment.
(Default: 115200bps)
When the setting exceeds the limit of
the connected equipment,
communication is performed at the
fastest transmission speed supported
by the connected equipment.
GT User's Manual
GT Designer3 Version Screen Design Manual
(Fundamentals)
7.4 GOT Side Settings
1
2
Range
3
9600bps,
19200bps,
38400bps,
57600bps,
115200bps
4
5
6
7
Disconnect the
faulty station
8
7 - 23