General Flow From System Selection To Drawing - Mitsubishi Electric GT1685 Connection Manual

22.3.2 General flow from system selection to drawing

System selection for using the multi-channel function is explained below.
Make selection and setting for the multi-channel function by following the order shown below.
System selection
Determine the connection type and the channel No. to be used.
Interface selection
Determine the GOT side interface and communication units to
be used for the multichannel function.
Checking the unit installation position
Determine the communication unit installation position.
Make settings for Communication Settings.
Confirm items to know before starting drawing.
22 - 12
22. MULTI-CHANNEL FUNCTION
22.3 GOT Side Settings
22.3.3
Determining the connection type and channel No. (System
selection)
22.3.4
Determining the GOT side interface (Interface selection)
1.3.7
Installing a unit on another unit (Checking the unit installation
position)
22.3.5
Setting for communication settings
22.3.6
Items to be checked before starting drawing