Mitsubishi Electric GT1685 Connection Manual page 816

(For bus connection)
6.
Double-click [PLC module] of the PLC side I/F to
display [PLC side I/F Detailed setting of PLC module].
7.
Check-mark either of the following in [PLC side I/F
Detailed setting of PLC module].
Bus connection
[via GOT(Bus) transparent mode]
Direct CPU connection
[via GOT (direct coupled) transparent mode]
*1 This is operation required in the case of using GX Developer
of which version is 8.22Y and above.
8.
The screen returns to [Transfer Setup]. Click
[Connection Test] to check if GX Developer has been
connected to the QCPU (Q mode).
23 - 54
23. FA TRANSPARENT FUNCTION
23.6 Personal Computer Side Setting
*1

Connecting the GOT and PLC in computer link
connection(when connected to the QJ71C24(N))
(GX Configurator is not supported.)
1.
Click [Online] [Transfer Setup] in GX Developer.
2.
The [Transfer Setup] is displayed.
3.
Set the [Transfer Setup]:
PC side I/F : Serial
PLC side I/F : C24
Other station : No specification
4.
Return to [Transfer Setup] and double-click [C24] of
the PLC side I/F to display [PLC side I/F detailed
setting of C24].
5.
Check [via GOT transparent mode] for [PLC side I/F
detailed setting of C24].