Personal Computer Side Setting - Mitsubishi Electric GT1685 Connection Manual

23.6 Personal Computer Side Setting

23.6.1 Accessing by GX Works3
The following shows the procedure to set the FA
transparent function of GX Works3.

When connecting the GOT and personal
computer with USB
(1) Connecting the GOT and PLC in Ethernet
connection
(a) When connecting to RCPU
1.
Click [Online] [Connection Destination] on GX
Works3.
2.
[Connection Channel Setup] is displayed.
3.
Set [Connection Channel Setup].
PC side I/F
PLC side I/F
Other Station Setting : No Specification
23 - 48
23. FA TRANSPARENT FUNCTION
23.6 Personal Computer Side Setting
: USB
: GOT
4.
Double-click [GOT] of the PLC side I/F to display
[PLC side I/F Detailed Setting of GOT].
5.
On the [PLC side I/F Detailed Setting of GOT], mark
the [via GOT (Ethernet) transparent mode] checkbox
and click [Setting].
6.
By clicking [Setting], the [GOT (Ethernet) Transparent
Setting] is displayed.
Here, set the built-in Ethernet port CPU or Ethernet
module, which is firstly connected via a GOT.
7.
Set [RJ71EN71] for [PLC Type].