Mitsubishi Electric GT1685 Connection Manual page 707

21.4 GOT Side Settings
21.4.1 Setting communication
interface (Communication
settings)
This section explains with an example of the following
system configuration.
1st GOT
RS-232
cable

Setting for the first GOT
(1) Settings of communication interface connecting to
the PLC
2.
1.
Select [Common] [Controller Setting] from the
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set the following items.
• Manufacturer: MITSUBISHI ELECTRIC
• Controller Type: Set according to the Controller
Type to be connected.
• I/F: Standard I/F (RS-232)
• Driver: Set either of the following according to the
Controller Type to be connected.
For GT14, GT12, GT11
Serial (MELSEC)
MELSEC-FX
For GT10
Serial (MELSEC)
MELSEC-A
MELSEC-FX
2nd GOT
RS-422
cable
GT11 GT11
3.
4.
Click!
21. MULTIPLE-GT14, GT12, GT11, GT10 CONNECTION FUNCTION
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
21.4.2 Communication detail settings
Click the [OK] button when settings are completed.
(2) Settings of communication interface connecting to
the second GOT
2.
1.
Select [Common] [I/F Communication Setting] from
the menu.
2.
The I/F Connection list window is displayed. Select
the following.
• I/F-1: RS422/232
CH No.: 9
Driver: Host (PC)
Click the [OK] button when settings are completed.
21.4 GOT Side Settings
17
18
19
20
21
Click!
22
23
21 - 7