Setting Of Serial Multi-Drop Connection Unit - Mitsubishi Electric GT1685 Connection Manual

20.6 Setting of Serial Multi-Drop Connection Unit

20.6.1 Write the OS
Write the standard monitor OS and communication
driver according to the desired connection type onto the
serial multi-drop connection unit.
For the OS writing methods, refer to the following
manual.
GT Designer3 Version
1.
Check-mark a communication driver according to the
desired connection type and click the [Write] button.
20 - 26
20. GOT MULTI-DROP CONNECTION
20.6 Setting of Serial Multi-Drop Connection Unit
Screen design manual
1.
Click!
20.6.2 Setting communication
interface (Communication
settings)
Make the Serial Multi-Drop Connection Unit interface
setting on [Communication with GT01-RS4-M] of GT
Designer 3.
For the communication interface driver, set the same
communication driver as the serial multi-drop
connection.
For details on [Communication with GT01-RS4-M] of
GT Designer3, refer to the manuals.
GT Designer3 Version Screen design manual