Connection To Built-In Ethernet Port Cpu Or C Controller Module - Mitsubishi Electric GT1685 Connection Manual

8.2.2

Connection to Built-in Ethernet port CPU or C Controller module

Connecting to
Built-in
Ethernet port
CPU
PLC
Communication
Model name
type
MELSEC iQ-R
Ethernet
*10*11
Series
Motion controller
*10*11
CPU
Ethernet
(MELSEC iQ-R
Series)
C Controller module
(MELSEC iQ-R Ethernet
Series)
MELSEC-QnUDE(H)
*5*6
Ethernet
MELSEC-QnUDV
*5*6
C Controller module
Ethernet
(Q Series)
*7*8
Ethernet
MELSEC-L
MELSEC-FX
Ethernet
(FX )
3GE
MELSEC iQ-F
Ethernet
*12*13
Series
*1 The destination connected with the twisted pair cable varies with the configuration of the applicable Ethernet network system.
Connect to the Ethernet module, hub, transceiver, or other system equipment corresponding to the applicable Ethernet network
system.
Use cables, connectors, and hubs that meet the IEEE802.3 10BASE-T/100BASE-TX standard.
*2 A straight cable is available.
When connecting QnUDE(H) and GOT directly with Ethernet cable, connection by cross cable is available.
8 - 12
8. ETHERNET CONNECTION
8.2 System Configuration
Connection cable
*1*2
Connection cable
Twisted pair cable
• 10BASE-T
Shielded twisted pair cable (STP) or
unshielded twisted pair cable (UTP):
Category 3, 4, and 5
• 100BASE-TX
Shielded twisted pair cable (STP):
Category 5 and 5e
Twisted pair cable
• 10BASE-T
Shielded twisted pair cable (STP):
Category 3 or higher
• 100BASE-TX
Shielded twisted pair cable (STP):
Category 5 or higher
GOT
Maximum
segment
Option device
*4
length
- (Built into GOT)
100m
- (Built into GOT)
GT15-J71E71-100
- (Built into GOT)
100m
GT15-J71E71-100
- (Built into GOT)
100m
GT15-J71E71-100
- (Built into GOT)
100m
GT15-J71E71-100
100m - (Built into GOT)
Communication driver
Ethernet(MELSEC),Q17nNC,CRnD-700
GOT
Number of
connectable
Model
equipment
*3
*9
16 GOTs
*3
*9
*3
*9
*14
*3
*9
16 GOTs
*3
*9
4 GOTs
*3
8 GOTs
*9