Mitsubishi Electric GT1685 Connection Manual page 741


GOT interface used for Ethernet connection
For the Ethernet connection, use the following interface built in the GOT and communication unit.
(1) GT16
Interface
Interface built in GOT
*1 Up to four channels can be used.
(2) GT15
Interface
Ethernet communication unit
(3) GT14
Interface
Interface built in GOT
*1 Up to two channels can be used.
(4) GT12
Interface
Interface built in GOT
POINT POINT POINT
When using Ethernet download, gateway function, or MES interface function
(1) GT16
The Ethernet download, the gateway function, and the MES interface function are available using the Ethernet
interface built in the GOT (one channel).
(2) GT15
For using Ethernet download, the gateway function and MES interface function, only one Ethernet
communication unit is required.
(3) GT14
The Ethernet download and the gateway function are available using the Ethernet interface built in the GOT
(one channel).
(4) GT12
The Ethernet download and the gateway function are available using the Ethernet interface built in the GOT
(one channel).

GOT interface used for serial connection
For the serial connection, provide interfaces equivalent to the number of channels by using the following interfaces
built in the GOT and communication units in combinations.
(1) GT16
Interface
Interface built in GOT
Serial communication module
*1 The operator authentication (external authentication or fingerprint authentication) or the FA transparent function (RS-232
communication) uses the RS-232 interface built in the GOT.
*2 For the RS-422 communication using the RS-232 interface built in the GOT, the RS-422 conversion unit is required.
(For GT 1655, the RS-422 conversion unit is not applicable.)
*1
Ethernet interface
GT15-J71E71-100
*1
Ethernet interface
Ethernet interface
*1*2
RS-232 interface , RS-422/485 interface
GT15-RS2-9P, GT15-RS4-9S,
22. MULTI-CHANNEL FUNCTION
Name
Model
Name
Name
Name/model
GT15-RS4-TE
22.3 GOT Side Settings
17
18
19
20
21
22
23
22 - 27