Mitsubishi Electric GT1685 Connection Manual page 813

6.
Double-click [GOT] of the PLC side I/F to display
[PLC side I/F Detailed Setting of GOT].
7.
Check-mark [via GOT (direct coupled) transparent
mode] in [PLC side I/F Detailed Setting of GOT].
8.
The screen returns to Specify Connection Destination
Connection1. Click [Connection Test] to check if GX
Works3 has been connected to the FX5UCPU.
(3) Connecting the GOT and PLC in computer link
connection (when connecting to RJ71C24)
1.
Click [Online] [Connection Destination] on GX
Works3.
2.
[Connection Channel Setup] is displayed.
3.
Set [Connection Channel Setup].
PC side I/F : USB
PLC side I/F : GOT
Other Station Setting : No Specification
4.
Double-click [GOT] of the PLC side I/F to display
[PLC side I/F Detailed Setting of GOT].
5.
Check-mark [C24] in [PLC side I/F Detailed Setting of
GOT].
6.
The screen returns to the [Connection Channel
Setup]. Click [Connection Test] to check if GX Works3
has been connected to the RCPU.
23. FA TRANSPARENT FUNCTION
23.6 Personal Computer Side Setting
17
18
19
20
21
22
23
23 - 51