Cc-Link Connection (Via G4); Cc-Link Connection (Via G4) - Mitsubishi Electric GT1685 Connection Manual

4.4 CC-Link Connection (Via G4)

This section explains the CC-Link connection (via G4) that connects the GOT to the AJ65BT-G4-S3 of the CC-Link
network.
The following shows an example of connecting the GOT to the AJ65BT-G4-S3 of the CC-Link network.
Network No. 0, Station No. 0
(Master station)
Monitor target
Control
system
(System A)
(1) Connection method
Connect the AJ65BT-G4-S3 of the CC-Link network to the GOT.
For details, refer to the following.
(2) GT Designer3 setting
Set GT Designer3 as follows.
Setting item
Controller Type
Device setting (Network setting)
Q Redundant Setting
*1 GT14, GT11, and GT10 are not compatible with MELSEC-QS.
*2 Only master station can be monitored in GT11 and GT10. The setting of GT Designer3 is not necessary.
4 - 20
4. HOW TO MONITOR REDUNTANT SYSTEM

4.4 CC-Link Connection (Via G4)

CC-Link
MELSECNET/H remote I/O network
14. CC-Link CONNECTION (Via G4)
GT16, GT15, GT12: MELSEC-QnA/Q/QS, MELDAS C6*
GT14, GT11: MELSEC-QnA/Q, MELDAS C6*
GT10: MELSEC-QnA/Q
Host
Do not set the item.
Network No. 0, Station No. 1
(Standby master station)
Settings
*1
*1
Network No. 0, Station No. 2
(AJ65BT-G4-S3)
GOT
Standby system
(System B)
Model
*2