Q Redundant Setting - Mitsubishi Electric GT1685 Connection Manual

4.9 Q Redundant Setting

The following explains the setting for automatically change the monitoring target of the GOT when monitoring a QCPU
redundant system.
POINT POINT POINT
Before making the Q redundant setting
In the Q redundant setting, do not set stations other than redundant CPUs.
1.
Select [Common]
2.
The setting dialog box appears. Make the settings with reference to the following explanation.
3.
Make the settings for the Q redundant setting.
In the Q Redundant Setting dialog box, settings can be made for each channel of the controller.
(Example: Ethernet connection (Station No. 5), redundant CPU pair No. 1 and No. 2, redundant CPU station No. 1 to 4)
Item
CH1 to CH4
Target at its own Station
(0-FF)
NW No.
*1
Pair No.
Station
No.
New
Duplicate
Delete
Delete All
Copy All
Paste All
For details of *1, refer to the explanation below.
*2 GT14, GT12, GT11 are applicable to built-in serial interface only.
[Controller Setting] [Q Redundant] from the menu.
Select a tab of the CH No. for the Q redundant setting.
Select this item to monitor the control system as a host station.
(In Ethernet connection, not available even when selected)
Set the network No. (1 to 225) for each of pair numbers (1 to 64).
Upper row: Setting for the first redundant CPU.
Lower row: Setting for the second redundant CPU.
(The same value as the value set for the first redundant CPU is displayed)
Set the station No. (1 to 63) of the redundant CPU for each of pair numbers (1 to 64).
Upper row: Setting for the first redundant CPU.
Lower row: Setting for the second redundant CPU.
(The value of "Setting for the first redundant CPU" + 1 is displayed)
Create a new pair No.
Copies one setting of the selected pair number to append it at the last line.
Deletes one setting of the selected pair.
After deletion, the succeeding pair numbers are renumbered to fill the deleted pair number.
Deletes the setting of all pair numbers.
Copies the Q redundant setting on the selected CH No. tab.
Pastes the copied Q redundant setting in the selected CH No. tab.
4. HOW TO MONITOR REDUNTANT SYSTEM
Contents
4.9 Q Redundant Setting
1
2
3
4
5
Model
6
7
*2
8
4 - 29