Setting In Personal Computer - Mitsubishi Electric GOT1000 Series Connection Manual

POINT POINT POINT
Ethernet-based driver
For using the VNC
• Gateway
• Ethernet Download
• Ethernet (MELSEC), Q17nNC, CRnD-700
• Ethernet (MELSEC), Q17nNC, CRnD-700, Gateway
• Ethernet (FX), Gateway
• Ethernet (OMRON), Gateway
• Ethernet (KEYENCE), Gateway
• Ethernet (TOSHIBA nv), Gateway
• Ethernet (YASKAWA), Gateway
• Ethernet (YOKOGAWA), Gateway
• EtherNet/IP (AB), Gateway
• Ethernet (SIEMENS S7), Gateway
• Ethernet (SIEMENS OP), Gateway
• MODBUS/TCP, Gateway
• Ethernet (MICROCOMPUTER)
In the peripheral setting, set [Destination I/F] in [Ethernet Download] for the [PC (Data Transfer)] dialog box.
To connect controllers including a programmable controller to the GOT by using the Ethernet connection, no setting
is required.
For the details of [Ethernet Download] , refer to the following

11.4 Setting in Personal Computer

For connecting the VNC
software to the personal computer to be connected and set it.
Refer to the following for details of the VNC
11 - 4
11. VNC(R) SERVER CONNECTION

11.4 Setting in Personal Computer

®
server, any of the following Ethernet communication drivers must be set on the GOT.
GT Designer3 Version1 Screen Design Manual (Fundamentals)
®
server to the personal computer (VNC
®
client software installation method and setting method.
®
client), it is necessary to install the VNC
®
client