Data Transfer (Personal Computer To Got); Connection From A Personal Computer To Got - Mitsubishi Electric Fatec GOT2000 Series Basic Training Textbook

4.3 Data transfer (personal computer to GOT)

This section explains procedures for writing data created on GT Designer3 to the GOT.
4.3.1

Connection from a personal computer to GOT

Connect the personal computer and GOT.
Notebook personal computer
e m a
e m a rk
Re m a
To connect the personal computer and GOT, RS-232
Use of the USB cable enables the data to be transferred at higher speed and reduces the operation time as
compared with RS-232 communication.
*1 When using an RS-232 cable, connect the personal computer and GOT via a PLC. For the details, refer to the GT Designer3
(GOT2000) Screen Design Manual.
Personal computer
(GT Designer3)
To USB
connector USB cable
*1
or Ethernet can be used in addition to the USB cable.
USB cable
RS-232 cable
Ethernet cable
4. From GOT screen creation up to the test
4.3 Data transfer (personal computer to GOT)
GOT
To USB
connector
Ethernet
PLC
GOT
1
2
3
4
5
6
4 - 21