Zone-5 - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message ZONE-5-ZS_POLICY_CHANGE: Default zoning policy changed to [chars].
Error Message
Error Message
ZONE-6
Error Message
from Standby mode.
Error Message
from active mode.
Error Message
failed to send heartbeat to system manager: Reason=[chars].
OL-15956-01
Default zoning policy changed to permit or deny.
Explanation
Recommended Action No action is required.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
ZONE-5-ZS_ZONE_SET_ACTIVATED: Zoneset [chars] activated.
Zone set activated.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
ZONE-5-ZS_ZONE_SET_DEACTIVATED: Zoneset deactivated.
Zone set deactivated.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
ZONE-6-LZ_BECAME_ACTIVE: LUN/Read-only Zoning Process became ACTIVE
The LUN read-only zoning process on the standby supervisor became active.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
ZONE-6-LZ_BECAME_STDBY: LUN/Read-only Zoning Process became STANDBY
Explanation The LUN read-only zoning process became standby from active mode.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
ZONE-6-LZ_FAILED_TO_SEND_HEARTBEAT: LUN/Read-only zoning process
The LUN read-only zoning process cannot send a heartbeat to the system manager.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Cisco MDS 9000 Family System Messages Reference
2-477