Ike Messages - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

IKE Messages

This section contains the Internet Key Exchange (IKE) messages.
IKE-3
Error Message IKE-3-CRYPTO_INIT_ERROR:
Error Message
(error-id [hex]).
Error Message IKE-3-FIPS_MODE_ERROR:
Error Message IKE-3-MAX_HALF_CONN_LIMIT_REACHED:
number of half open Phase 1 connections.
Error Message IKE-3-PHASE1_NEGOTIATION_FAILED:
for peer [chars].
Cisco MDS 9000 Family System Messages Reference
2-122
Cryptographic initialization error.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 2.0(1b).
Introduced
IKE-3-ENABLE_ERROR:
Explanation The Internet Key Exchange (IKE) service failed to store the enable flag in the
configuration. As a result, IKE will exit.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
The FIPS mode could not be set by IKE.
Explanation
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.1(1).
The number of half open connections has exceeded the maximum limit.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.0(3).
Introduced
The Internet Key Exchange (IKE) policy negotiation failed for the peer.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 2.0(1b).
Introduced
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
IKEv2 crypto init error: [chars].
Unable to store enable flag in configuration
Could not set FIPS mode.
IKEv1 : Exceeded the limit for
IKEv1: Phase 1 negotiation failed
OL-15956-01