Securityd-2 - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message SECURITYD-2-FIPS_POWERUP_SELF_TESTS_STATUS: FIPS power-up self-test
status: [chars].
Error Message SECURITYD-2-FIPS_SELF_TEST_FAILED: FIPS self-test failure : [chars] :
[chars].
Error Message SECURITYD-2-PROGRAM_EXIT: security/accounting daemon exiting:
[chars].
SECURITYD-3
Error Message
SECURITYD-6
Error Message
OL-15956-01
Status of the FIPS self-test.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.1(1).
Introduced
The FIPS self-test failed.
Explanation
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.1(1).
Security and accounting daemon is exiting.
Explanation
If you purchased Cisco support through a Cisco reseller, contact the reseller
Recommended Action
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
SECURITYD-3-NVRAMFAILURE: nvram failure.
NVRAM cannot be read or written to. The accounting log cannot be stored.
Explanation
If you purchased Cisco support through a Cisco reseller, contact the reseller
Recommended Action
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
SECURITYD-6-ACCOUNTING_MESSAGE: [chars].
Accounting message.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Cisco MDS 9000 Family System Messages Reference
2-301